How to Start a Pixel Light Show: A First-Year Plan
A first pixel light show needs five things: pixel lights, a controller, a power supply, a small player that runs the show, and xLights on a computer to set it up. A realistic first year is about 600 pixels and about $1,180.
What the parts do
- Pixels are lights where every bulb can be any color on its own. That is what lets a house chase, sparkle and spell things.
- The controller sends data to the pixels. One controller with several ports runs a whole starter show.
- The power supply feeds the pixels. Twelve-volt pixels are the forgiving choice for long roofline runs.
- The player stores the show and starts it on a schedule. A Raspberry Pi running the free Falcon Player (FPP) is the usual one.
- xLights is the free program where you lay out your house and match effects to music.
- An FM transmitter puts the music on a car radio, so the yard stays quiet.
A size that works for a first year
Small enough to finish, big enough to look like a show: a roofline, a few mini trees and a pair of arches.
One concrete starter show
- 600 twelve-volt bullet pixels: 75 ft of roofline in three 100-pixel runs, four tomato-cage mini trees, two PEX arches
- One Falcon F16V5 controller, one 12 V supply, brightness set once so no run needs power injection
- A Raspberry Pi running the free Falcon Player (FPP) indoors by your router, one Ethernet cable to the show box, an FM transmitter on the headphone jack
- Every plug is xConnect, so everything you order mates
The order to do it in
- Measure the roofline and decide the props before buying anything.
- Order early. Pixels and controllers are often out of stock in autumn, and shipping can take weeks.
- Bench-test every string on the floor before it goes on the house.
- Build the layout in xLights on a photo of your house.
- Buy a ready-made sequence for the first song and map it onto your props. Making your own can wait a year.
- Hang everything, then set the schedule on the player.
What catches first-timers
- Mixed connectors. Pick one plug type and order everything with it.
- Too many pixels on one run at full brightness. Lower brightness is the simple fix, and nobody can tell from the street.
- Leaving the software for December. Set up xLights before the hardware arrives.
- Mains wiring. If you are not comfortable with it, buy the controller box pre-wired from a pixel vendor.
The guide
Build Your Own Light Show is an 18-page guide written around that one starter show, with a shopping list, a port plan, ten illustrated steps and an xLights starter folder with the props already set up. No coding.
The pictures of finished projects in this shop are rendered previews made from the design; see About.
